Your Cart

How to Make a Cross Joint: A Step-by-Step Guide?

Making a cross joint is a unique and fun way to enjoy your cannabis. Not only does it look impressive, but the process of crafting it helps to keep your hands occupied and is a great conversation piece. It requires a few extra steps in the rolling process, but you’ll be proud of yourself after you make your first cross joint!

Why Make a Cross Joint?

Making a cross joint is a great way to enjoy your weed with friends. It takes a bit of skill and practice to roll a perfect joint but it is definitely worth the effort! Not only do cross joints look cool, they also smoke more evenly, allowing you to get the most out of your weed.

If you make a cross joint for your friends, you’ll be the life of the party!

In order to make a cross joint, you’ll need a few basic supplies, including cannabis, rolling papers, and scissors. Once you have all your materials ready, you can then begin the process of making your cross joint. Be sure to take your time and practice patience; it may take a few tries before you get the perfect joint.

You’ll also need to take care when packing and rolling the joint, as it needs to be tight without being too tight. With a little practice and a bit of patience, you’ll eventually be able to make the perfect cross joint that your friends will love!

Materials Needed

When making a cross joint, you will need the following materials: rolling papers, a joint roller, and, most important, weed. Make sure that the cannabis strain you choose has a good smell and taste, as this will impact the overall experience.

You want to make sure you have enough weed, so it’s a good idea to buy a bit extra to be safe. You will also need a pair of scissors – the sharper the better. A pair of tweezers and a lighter or hemp wick are also recommended for construction and lighting the joint.

You will need a flat surface to roll the joint on and a pinch of patience for the process.

Having the right materials on hand is essential for a successful cross joint. Make sure you don’t skip out on any of the supplies, as even the smallest items can make a big difference in the end result. Make sure you have the right tools and the right amount of weed before you start – you don’t want to be caught without them.

Step-by-Step Instructions

When it comes to making a cross joint, don’t be intimidated. All it takes is a bit of practice and some simple supplies, and soon you’ll be a pro.

Here’s a step-by-step guide to help you out. To get started, you’ll need to grind up your cannabis.

If you don’t have a grinder, don’t worry – you can use scissors and a plate to break it up manually. Once the weed is ground, you’ll be ready to craft your cross joint.

Start by packing it like a normal joint, using a small crutch and your ground weed to fill it out. Once the joint is packed, roll it up nice and tight. Make sure it’s not too loose, otherwise it won’t light properly.

Set the joint in your cross shape, twisting the two ends together. Light it up and enjoy! Keep practicing and soon you’ll be able to craft the perfect cross joint.

Step 1: Grind the Weed

Grinding your weed before constructing your cross joint is essential for a smooth, even burn. Use a grinder to break up the buds into small and even pieces.

If you don’t have a grinder, you can also break up the buds with your fingers. If possible, try to keep the particles of weed roughly the same size, so that the joint burns evenly. After grinding, you’re ready to start the construction of your cross joint.

Step 2: Make the Cross Joint

To make the cross joint, start by making three rolls forming the shape of a triangle. Once the three rolls are formed, cut one of the rolls in half and overlap the two halves with the two other rolls to create a cross shape. Make sure to make the cuts as even as possible.

After the cross shape is formed, take two small pieces of clear tape and place them across the 4 points of the cross, firmly pressing them down to secure the shape. This will help keep the shape of the cross joint in the rolling process.

Once you’ve secured the shape of the cross joint, it’s time to start packing the joint.

With each roll, pack the weed loosely but firmly in the roll to create a stable and light joint. Don’t forget to leave some space for airflow in the joint.

Once the cross joint is packed, it’s time to start rolling. Start by taking the two rolls and firmly pressing them together in the middle of the cross. You should be able to feel that the two rolls are sticking together.

After that, begin to roll the cross joint in the shape of a triangle, while making sure the sides are even.

Make sure to keep the cross joint as tight as possible and to keep the sides even. If you have trouble rolling it, use some rolling papers or a rolling pin to help.

Once the cross joint is rolled, it’s time to set it. To do this, use a lighter and lightly apply heat to the sides of the cross joint to help set it. Make sure to not apply too much heat, as it can burn the joint, making it more difficult to smoke. After the joint is set, it’s ready for smoking. Enjoy!

Step 3: Pack the Cross Joint

When packing the cross joint, the weed should be evenly spread throughout the rolling paper. Make sure to press it down gently, as too much pressure can damage the joint’s integrity. This step is often the trickiest and will take some practice to perfect.

After the weed is all evenly distributed and lightly pressed, roll up the paper around the joint and carefully twist the ends to make sure the joint is sealed.

Wrap the rolling paper around the cross joint to give it a nice, even shape and use a bit of saliva (or some rolling glue) to secure the ends. This will make sure that no weed can escape and that the joint will stay together while you are smoking it. You can shape the joint to make sure that it looks aesthetically pleasing.

This can be done by slightly flattening one side of the joint to give it a nice curve. After this, the joint is ready to be set and lit. Enjoy!

Step 4: Roll the Joint

Rolling the cross joint can be a tricky part of the process. It’s important to make sure that the joint is rolled tightly and securely so that it will stay lit. Start by taking the rolling paper and folding it in half lengthwise.

Start rolling it with your thumbs, making sure to press down firmly and evenly.

Make sure to leave some space in the center of the joint for the filling. Once the joint is completely rolled, you can use a small piece of rolling paper to make a “crease” at the closed end of the joint, so that it will stay closed while smoking. You can use a paper clip or toothpick to shape the joint and make sure it’s nice and even.

Step 5: Set the Joint

Once you have your joint rolled up and ready to go, it’s time to set the joint. Setting the joint involves packing the end with a material to create an airtight seal. You can use a cigarette filter, a small piece of cardboard, or even a piece of aluminum foil.

Whichever material you choose, make sure it’s not too big for the joint, as it can interfere with the airflow.

Once you’ve chosen your material, lightly twist it at the end of the joint, creating a cone shape, then carefully and firmly press the material down into the joint, making sure it’s evenly packed. Don’t press too hard, as this can cause the joint to crack and collapse. When you’re done packing the joint, use a lighter to quickly heat up the material, and you’re done! Now you can light up your cross joint and enjoy.

Step 6: Enjoy!

Enjoy your cross joint responsibly! When consuming weed, it is important to be aware of your surroundings and the amount of THC you’re taking in.

Remember to stay hydrated and snack on some food if needed. Take breaks from smoking if your head starts to spin, and if you’re feeling anxious or paranoid, remember to breathe deeply and relax. Take the time to savor your special creation!

Enjoy the feeling of accomplishment for making a successful cross joint. Choose some good music, a movie, or game to pair with your joint.

Even better, smoke it with friends for a fun and satisfying experience. When you’re all done, make sure to properly dispose of your joint.

Try to put out the joint before it’s completely finished and don’t leave the remnants lying around. Respect the environment and clean up after yourself. Go ahead, light up and enjoy!

Leave a Reply
ON SALE PRODUCTS
TOP RATED PRODUCTS
CONTACT US
EMAIL: [email protected]

CLICK HERE FOR MORE CONTACT METHODS, GIVEAWAYS, REVIEWS, SUBSCRIBE & MORE